GreenLaser

        Product introduction(About Laser introduction):

    FUZHOU TCT Co., Ltd. has been supplying Solid States lasers that with different wavelengths including 473nm, 532nm, 635nm, 650nm, 670nm etc. 

    These lasers are widely used in scientific, medical, industrial and entertainment applications. We have many years experience in researching and developing DPSS laser systems. Now we are one of the main suppliers worldwide for low-power and low cost DPSS lasers.

    We can also provide special service for non-standard requests. Whether your requirement in on our product list or not, we will modify or produce an entirely new design to satisfy your needs or application. Don't hesitate to contact our engineers and sales person for assistance with your applications. We are certain that we can provide a product to fulfill your needs.     

   Model: TCT-G-532-**** (532nm-Green Laser-1~300mW)
 
        
Characteriscics:
Stable and adjustable output power
Over-temperature and over-current protection
External modulation available
Suitable for scientific research, medical therapeutics, biotechnology, laser show, etc
   Specifications:
       Wavelength (nm)    532
       Output Power (mW)    1~ 300
       Beam Mode    TEM00       Multi-longitude
       Power stability(RMS)    < 5 % @ 8 hours
       Beam Divergence (full angle, mrad)    1.2 ± 0.2
       Cooling system    TEC

       Model: TCT-G-532-**** (532nm-Green Laser-1~300mW)

      Model

TCT-G-532-50

TCT-G-532-100

TCT-G-532-300

      Wavelength (nm)

532

      Output Power (mW)

1~ 50

50  ~ 100

100  ~ 300

      Working Mode

CW

      Beam Mode

   Transverse

TEM00, TEM01

   Longitude

Multi-longitude

      Spectral linewidth (nm)

< 0.1

      Polarization

Line polarization

      Polarization Ratio

>100 : 1

      Beam Quality (M2 factor)

<1.2

      Beam Divergence (full angle, mrad)

1.2±0.2

1.2~2.0

3.0±0.2

      Beam Diameter at aperture (mm)

1.2±0.2

2.0~3.0

4.0±0.2

      Beam roundness

>90%

      Power stability(RMS)

<5% @ 8hours

      Aperture Position (mm)

19

19

19

      Dimensions of Laser Head 
      (L×W×H, mm)

120*37*37

120*37*37

120*37*37

      Integrated Driver Model

G1/G2Series

G3*Series

G4Series

      External Modulation

5V TTL / 5V Analogue

      Modulating Repetition

30KHz TTL / 10KHz Analogue

      Cooling system

TEC+Air cooled

TEC+Air cooled

TEC + Air cooled

      Warm-up time (minutes)

<5

      Operation Temperature ( ℃ )

18~30

      Expected Lifetime (hours)

>10000

      Warranty Time

1 year